Before using a remote-controlled lawn mower for the first time, the core task is to complete "safety checks + parameter settings + function adjustments" to ensure stable and risk-free operation. The specific steps are as follows:
Check the mower body condition: Confirm that the blades are free from deformation, looseness, or gaps; ensure that connecting parts such as screws, tracks/wheels are secure; and verify that no components are damaged.
Power supply and battery preparation: Fully charge the new battery (it is recommended to follow the charging duration specified in the manual for the first charge to activate the battery performance). Check that the battery interface is free from looseness and oxidation, and that the power cord/charging equipment is in normal condition.
Clear the working environment: Remove obstacles such as stones, branches, and wires from the lawn; mark fixed obstacles like flower beds and sculptures to avoid equipment damage or hazards during mowing.
Mowing height adjustment: Based on the initial height of the lawn and your needs, set the mowing height using the remote control or the knob on the mower body (for the first use, it is recommended to set it to a medium height to avoid damaging the lawn by cutting too low at one time).
Working mode selection: For manual remote-control models, switch to the "Manual Mode"; for intelligent models, you can set "Automatic Operation" and "Boundary Limitation" (some models support the setting of virtual boundaries or physical boundary ropes) to clearly define the mowing range.
Auxiliary parameter adjustment: Enable intelligent functions such as automatic obstacle avoidance and path planning (if available); adjust the mowing speed (for the first use, it is recommended to run at a low speed to get familiar with the operation).
Remote control pairing and testing: Pair the remote control with the lawn mower (follow the steps in the manual), and test basic operations such as forward, backward, steering, start, and stop to ensure that the signal is sensitive and free from delay.
Intelligent function calibration: For models supporting GPS/RTK positioning, complete positioning calibration in an open area to ensure accurate boundary recognition and path planning; for the automatic obstacle avoidance function, place obstacles at a short distance to test its recognition and avoidance effects.
No-load test run: Let the lawn mower run with no load for 5-10 minutes in a grass-free or open area. Observe whether the mower body runs stably, with no abnormal noise; check that the blades rotate normally and that the braking function is effective.
Read the manual: Clearly understand the equipment's slope limits, prohibited working scenarios (such as slippery ground after heavy rain), safety distance requirements, etc., to avoid non-compliant operations.
Emergency function inspection: Test whether the emergency stop button is sensitive; familiarize yourself with functions such as low battery alarm and fault prompt to ensure timely response to unexpected situations.
Chinese
